X-GUARD 2.9.21 — DOCUMENT PROTECTION AND NETWORK CONTROLS

Exit the previous X-Guard. Extract the signed release ZIP, check that Windows
shows Travis Hilton as the verified publisher, then run x-guard.exe and approve
the administrator prompt. Your licence, trial dates and settings are retained.

RECOVERY WITHOUT A LICENCE
Open Licence > Restore X-Guard changes. This remains available after the trial
expires or a key is revoked. Read the confirmation before continuing.

Monitoring closes first. A separate recovery process then:
- disables strict mode and automatic blocking;
- removes firewall rules whose names are recorded in X-Guard's saved rule lists;
- clears corresponding saved strict/device/block decisions when removal succeeds;
- restores saved inbound-only lockdown switches without resetting global policies;
- restores saved DNS server selections;
- restores saved camera/microphone values, including a pre-existing Deny setting;
- removes this copy's startup task and website HTTPS allow rule.

Your licence, trial dates and logs are retained. Failed steps retain their backups
and display a report so you can retry. A missing/disconnected DNS adapter must be
reconnected before recovery can complete. Missing or corrupt backups are not used
to guess your previous configuration. No entire-firewall reset is performed.

Windows security-audit settings and registered DNS-over-HTTPS provider templates
are retained because earlier versions did not save their original state. Settings
changed outside X-Guard are not reset. Contact support if manual review is needed.

Recovery leaves monitoring closed. Reopen X-Guard when you want to use it again.
An active licence or remaining trial is required for normal monitoring/features.
Restoration, vault unlock and export remain available without activation.
Automatic blocking stays off until re-enabled.

INSTALLER EDITION
The optional 2.9.21 installer adds Start menu shortcuts and Windows uninstall.
Interactive uninstall offers restoration (Yes) or retaining changes (No).
Silent uninstall attempts restoration. On failure it keeps the app installed so
recovery data remains accessible; review recovery-report.txt and retry.
Existing portable copies and custom data directories are not removed/migrated.

ONLINE CHECKS
Daily update/revocation checks continue, with publisher-refresh polling about every
five minutes while running and online. The manual Check for updates button also
refreshes licence status. Updates remain manual. Optional precise map locations
send a remote connection's public IP to GeoJS after you opt in.

Support: https://x-guard.uk/support/

LIVE CONNECTION BLOCKING
Right-click a row in Live connections:
- Block this connection (persistent): available for confirmed incoming/outgoing
  TCP rows with a known executable. Blocks that executable talking to the shown
  remote host on the TCP service port, in the selected direction. Future matching
  connections are blocked too. Outbound client ports are not pinned.
- Block program from network (both directions): applies to the whole executable
  and its other connections. Read the confirmation, especially for shared Windows
  processes. This option can also be used for UDP or ambiguous TCP rows when the
  executable is known. Those rows do not offer a precise connection block.

Loopback connections are not offered a precise block. Existing TCP connections
are requested to close where Windows supports it; rows may take time to disappear.
Use Settings to remove X-Guard blocks, or remove the specific X-Guard rule in
Windows Defender Firewall with Advanced Security (wf.msc).

RE-ENABLE DISABLED RULES
In Security events, select an event saying X-Guard firewall rules are gone or
switched off. Choose Re-enable rules and confirm. The action checks current
Windows state and re-enables disabled rules recorded by this X-Guard copy.
The result reports re-enabled, deleted and failed rules. Deleted rules cannot
be re-enabled: reapply the original block. Firewall profile switches and
unrelated rules are not changed. Both new actions require an active trial or
valid licence and administrator access.

RELIABILITY SAFEGUARDS (INTRODUCED IN 2.9.17)
- Failed rule removal retains recovery records and can be retried.
- Matching blocks are reused or enabled in place; they are not deleted first.
- Rule ownership is saved before new Windows blocks are created.
- Strict Allow/Forget keeps its decision if Windows refuses to remove a rule.
- Strict blocks check Windows even when the rule name is already recorded.
- Settings saves are ordered; failed saves keep previous settings active.
- Portable copies do not overwrite an installed app. To update an installed or
  startup copy, use the signed installer or Microsoft Store. A portable launch
  displays a notice if the protected copy differs.

DOCUMENT PROTECTION (INTRODUCED IN 2.9.18)
Open Document protection in the sidebar. Named encrypted vaults are stored in:
Desktop\X-Guard Documents\<vault name>.xgvault
Existing Documents.xgvault files remain compatible and are found automatically.
Windows Desktop redirection, including OneDrive, is respected. If the Desktop is
synchronised, the encrypted archive may be copied by your sync provider. Keep a
separate backup; do not edit the same synced vault on two PCs simultaneously.

Create a vault using a password of at least 12 characters and confirm it. This
password is separate from your Windows password and X-Guard licence. It is not
sent to the website. There is no password recovery: keep it in a safe place.

Add file creates an encrypted copy; it DOES NOT delete or securely erase the
original. Remove selected removes the encrypted copy from the current archive,
but backups or sync history may retain older copies. Export selected writes an
ordinary, unencrypted file to a new filename; X-Guard never overwrites an existing
export destination. It does not automatically launch exported documents.

Lock clears the unlocked file list and releases the vault. It also locks when you
leave the page, switch apps, lock Windows, or reach five minutes unlocked. An
in-progress file operation finishes before its session can be cleared. Closing
X-Guard also ends access. Exported files remain accessible after locking.

Unlock and export remain available after trial expiry or licence revocation.
Creating a vault, adding files and removing files require a valid licence or
active trial. After reactivation, restart X-Guard to restore normal features.

Files and their names are encrypted at rest using AES-256-GCM. A random salt and
PBKDF2-HMAC-SHA256 derive the key from your password (600,000 iterations). Use a
long, unique password. This protects the locked archive; it does not protect a
compromised PC, files while unlocked, or original/exported copies. Internet access
stays available. This feature does not block uploads or give a folder its own
firewall. No external drivers or BitLocker edition are required.

Limits: 20 MB per file, 64 MB total unencrypted content, up to 1,000 files. For
larger collections, use a dedicated encrypted-drive product. Choose existing vault
opens a moved/backup .xgvault file. Back up the archive while it is locked. Keep
backups outside the same device; X-Guard uninstall does not delete your Desktop
vault or exports. Never delete the vault if it is your only copy.

TRACE ROUTE
The map toolbar has a permanent Trace route button. Enter a public IP address or
website and click Trace route, or select a public connection on the map and trace
it. Stop trace cancels the current request. Windows tracert sends diagnostic
network traffic; routers can ignore it, so missing hops are not proof of a threat.

COUNTRY CONNECTION TRACING
Click a country on the map. Select a row in its Active program / Remote address
list, then click Trace route. Double-clicking a row also starts the trace.
The selected connection is preserved across list refreshes. If it closes, select
another active connection. Connection details opens its IP information.

NAMED VAULTS AND THE VAULT SELECTOR (2.9.21)
The Document protection page has an existing-vault dropdown. Desktop .xgvault
files are listed automatically; existing Documents.xgvault files still work.
Browse selects a vault elsewhere and remembers its location. Refresh vault list
updates the choices. The last opened vault is preferred when reloading the list.
Up to 100 locations are remembered; locations may remain listed while a drive is
offline. Choose Browse if a vault has been moved to a different folder.

To create another vault, lock any open vault, enter a name in Name for new vault /
rename, enter and confirm a password of at least 12 characters, then Create vault.
Its file is placed in Desktop\X-Guard Documents\<vault name>.xgvault.
The .xgvault extension is added automatically. Existing files are never replaced.

To rename an existing vault, select it and lock it, enter its new name in the same
name field, then choose Rename selected vault. Renaming keeps it in the same
folder and changes only its filename, preserving its password and encrypted
contents. It cannot overwrite another vault or rename an archive open in X-Guard.
Creating and renaming require an active trial or licence. Selection, Browse,
unlocking and exporting remain available without activation.

Changing dropdown selection locks the old vault and clears the password fields.
Each vault has its own password. X-Guard remembers vault paths in your Windows
user profile; passwords and encryption keys are not saved in that list. Vault
names are visible filenames, not encrypted document names inside the archive.
Use non-sensitive vault names if the filename itself would reveal private details.
SECURITY TOOLS - USER GUIDE ADDENDUM (2.9.21)

Open Security tools in the sidebar, then choose one of eight sections.

WHILE I WAS AWAY
Enter a name, choose Mark away & lock Windows. Save your work first. On return,
choose I'm back - compare. The report compares captured settings and observations
while X-Guard was running. It does not identify a person or prove the cause of a
change. Sleep, shutdown, delayed/missing scans and monitoring gaps limit coverage.

APP BEHAVIOUR CHANGES
Inspect observed executable file-content changes and new network destinations.
A software update or CDN change can be legitimate. An unfamiliar address is not
proof of malware. Only programs seen in supported Windows connection data are
tracked; this is not full packet capture. Fingerprints cover readable regular
files up to 256 MB, refreshed on observed metadata changes and periodically.

WHY IS THIS STILL ALLOWED?
Review X-Guard's saved allow decisions, not every effective Windows permission.
Review this file version records the current fingerprint for comparison. Remove
saved allow forgets the X-Guard decision; it does not install a Windows block and
other policies may continue permitting access. Use explicit blocking when wanted.

CAN THIS APP WORK OFFLINE?
Close a non-system application, choose its .exe, and start the five-minute test.
Launch it yourself normally. This blocks outbound traffic for that path, including
local-network traffic. Child processes, other copies and pre-existing connections
may behave differently. Observations do not capture every failed network attempt.
No app is automatically launched. Do not select remote-access or critical software.
Recovery is scheduled before the block using a protected copy of this exact signed
release. It ends the test at the deadline or on the next boot, and Restore selected
test stops it early. The GUI also checks overdue tests. Windows must be running for
recovery to execute. Recovery is best effort; inspect any reported failure.
Use the normal protected ProgramData\X-Guard folder. A custom folder, untrusted
helper, invalid signature or inability to register protected recovery prevents the
test from starting. Keep the recovery folder and helper until all tests are restored.

THE BLOCKED APP CAME BACK
An identical SHA-256 file observed at a different path from a tracked blocked app
is reported. No automatic blocking is performed. This detects exact copies, not
modified/repacked files, and observation can occur after communication has begun.
A matching file is not proof of malware. Inspect the finding and block explicitly.

COMPARE TWO MOMENTS
Enter a label and Save comparison point. Select Before and After, then Compare.
Settings reads are best effort and not atomic. Startup entries which cannot be
read or transiently disappear can affect comparisons. Reports describe captured
differences, not the cause. Deleting a point does not change Windows settings.

UNDO MY SECURITY EXPERIMENT
Start a named session. Choose a non-system app and Add application block. Only
blocks added through this panel belong to the session; unrelated security changes
are not recorded. Finish keeps the blocks active. Undo removes only unchanged
rules belonging to the chosen session. Modified scopes are retained for review;
this is not a Windows restore point or general system rollback.

PROVE MY PROTECTION WORKS
The confirmation explains a disposable vault crypto/tamper check, firewall-profile
configuration reads, and one publisher TCP path tested before/during/after a scoped
block. No personal documents are sent. Endpoint: x-guard.uk, TCP port 443; DNS is
used to resolve it. Strict mode causes the network test to be skipped rather than
adding an exception. Baseline failure or missing prerequisites is NOT TESTED, not
a pass. These limited checks cannot certify overall protection or malware safety.

REPORTS AND RETENTION
Hide private details is enabled by default: export/copy gives counts only. Turn it
off only when you intend to include application names, paths, addresses, labels
and findings. Data is saved locally in the protected X-Guard data folder. The new
tools do not upload observation reports. Up to 512 programs, 1,000 observations,
16 comparison points, 50 experiments and 2,000 recent network samples are retained;
older/bounded observations mean reports are not a permanent audit trail. Each app
retains at most 64 destination values. Existing update/licence requests continue.
After expiry/revocation, new tests and observation tools are restricted; recovery
and undo of owned blocks remain available from Restore test changes. Vault unlock
and export remain available as before. If recovery says a scope changed, review it
in Windows Firewall/Task Scheduler; do not delete unrelated rules or tasks.

MAP
Search and time/program controls occupy the first row. Zoom, Fit connections,
Whole world, Trace route, Map options and Export occupy the second. Map options
contains full direction and display labels. Select a country's active connection
and choose Trace route (or double-click it). Some routers do not answer probes.


MONTHLY LICENCES
Install 2.9.21 or later. Open Licence and paste the activation key from the
purchase email while online. X-Guard refreshes access automatically and uses
the latest signed result offline, for up to 24 hours and within the paid period.
If payment fails, paid access ends when the paid period ends. Once paid again,
the same activation can renew online. If X-Guard already entered licence-only
mode, reopen it after the Licence page confirms access.
Use the billing portal on x-guard.uk to update payment details or cancel.
Keep activation keys private. Vault unlock and export remain available.
Lifetime keys continue to be verified locally.
